Abrasives:
Mounted Points, Carbide Burs and Accessories
Mounted points, wheels,
carbide burs and accessories are available from REMET. The materials
range from aluminum oxide and ceramic grain to non-woven nylon
and cotton fibers. When looking to polish or deburr a casting,
REMET will help customers select the proper fit for very specific
applications. REMET will factor in the alloy, grit, rate of cutting,
shape of the point, length of the mandrel and casting geometry
in developing a recommendation for each customer specific need.
- Experienced Application Support
- Customized Shapes and Formulas
Available
Carbide Burs
Heavy Stock Removal
Carbide burs are
used for rapid stock removal on medium and hardened steels, stainless
steels, titanium, inconel and many other ferrous and non-ferrous
metals. Carbide burs are very common in metal working industries
and come in a wide range of shapes and sizes. Ask your REMET
representative for more detailed information.
[
back to top ]
Mounted Points and Wheels
Medium Stock Removal
There are many variables involved in selecting the proper mounted
point. REMET will help you select the fit for your application
by weighing the following: alloy, grit, cut rate, point shape,
mandrel length and most importantly safety.
ALUMINUM OXIDE
A very versatile, blunt shaped grain abrasive that handles both
soft and hard applications well. It is able to withstand heavy
use before wearing down or loading.
SILICON CARBIDE
An abrasive that is hard and sharp with exceptional strength,
and it breaks down fast to provide a constant fresh cutting surface.
CERAMIC
GRAIN
This non-fused aluminum oxide is very tough and provides exceptional
durability and cut rates. The advantages and costs need to be weighed
against standard aluminum oxide.
[
back to top ]
Specialty Mounted Points and Wheels
Light Stock Removal
Specialty mounted points made out of alternative materials for
polishing and light deburring.
GRIER-BRITE
These pressed non-woven tough abrasive nylon fibers are used primarily
in finishing and some light deburring. They have long life and
are typically non-loading.
RUB-BRITE
Rubber bonded abrasive that provides light deburring and can be
used on a wide variety of materials—from brass and copper
to titanium and inconel and many other ferrous and non-ferrous
metals.
GRIER-TEX
A cotton fiber abrasive made from laminating non-woven cotton fibers
with various grains and bonds and is good for light deburring.
Works for both ferrous and non-ferrous, and is found to work
extremely well with stainless steel. GRIER-TEX points run cool
and smooth with no loading and are thus ideal for aluminum and
other soft metals.
[
back to top ]
Grinding Wheels
The many types of wheels and abrasives include: bench, pedestal,
surface, valve seat, depressed center, reinforced, convolute and
unitized. Material options include aluminum oxide, silicon carbide,
GRIER-TEX, GRIER-BRITE and others.
[
back to top ]
Cut-Off Wheels
Many different formulas and sizes available
up to 12" diameter.
Used for
cutting off gates and risers in chop saws, portable tools, hand-held tools and
table-top saws.
[
back to top ]
Collets
and Grinder Hardware
Collets are designed for repairing and maintaining grinders to
proper safety requirements. Collets are available in 100, 200
and 300 series to match the various sizes and types of grinders.
Front-end hardware for many common grinders are available at
competitive prices, and REMET encourages routine maintenance
and replacement of worn pieces to keep grinders running safely.
Ask your REMET representative for more detailed information.
[
back to top ]
Accessories
Some common and unique accessories for obtaining the best results
from your abrasive products.
FLEX-SHAFT
Copper or Stainless Steel flexible shaft with internal flexible
cable allows you to reach around a corner and deburr or polish
those hard to reach areas. Specialty threaded mounted points
and wheels complement this fascinating tool.
REACH-IN MANDREL
A special 1/4" x 6" tapered spindle accepts specialty
mounted points and wheels to reach confined spaces.
High Strength
Mandrel
Specialty High Strength mandrels allow you to run at higher
RPMs while at a longer length.
Segments
Used in large scale grinding operations. Ask for more details.
DRESSING
STICKS
Available in aluminum oxide and silicon carbide for truing,
shaping and dressing points and wheels. A necessary step to
extend the life of your points and wheels.
[
back to top ]
|
