Crucibles, Ladle Liners and Special Shapes

Crucibles, ladle liners and various special shapes are available from REMET in zirconia, alumina and fused silica. REMET facilitates the selection process for customers by comparing melting techniques, alloys being melted, size and type of furnace and thermal cycling effects. This assures the correct product is paired with the proper set of variables. Capacities ranging from 2 to 2000 lbs. (0.9 to 900 kg) are available, as well as custom shapes and sizes. Compatible Ram and Cap mixes are also available.

• Alumina
• Fused Silica
• Zirconia
• Ram and Capping Mixes

Alumina
Crucibles, Ladle Liners and Specialty Shapes

• Versatile and economic solution.
• Low reactivity with alloys.
• Good thermal shock resistance.
• Wide range of sizes.
• Specialty designs upon request.
• Ladle liners available with bottom pour or standard design, and with or without lips.
• Alumina contents available from 90%-99%.

[ back to top ]

Fused Silica
Crucibles and Ladle Liners

• Great thermal shock resistance.
• Wide range of sizes.
• Ladle liners available with bottom pour or standard design, and with or without lips.

[ back to top ]

Zirconia
Crucibles, Nozzles and Specialty Shapes

• High temperature resistance.
• High density to minimize metal penetration.
• For vacuum melt alloys.
• Low reactivity with alloys.
• Resistant to erosion.
• Isostatically pressed for consistency.
• Multiple stabilizing agents available.

[ back to top ]

Ram and Capping Mixes
Zirconia Backup Grain
Silica Rams
Pak-Tite Spinel
Pak-Tite Plaster

A complete range of ramming and capping materials are available for use with our crucibles. Please ask a representative to help you match the right product with a crucible.

[ back to top ]