Crucibles, Ladle Liners & Special Shapes

Rapid Prototyping • Bio-Soluble Thermal Blankets & Paper • Pattern Washes • Anti-Foams • Crucibles, Ladle Liners • Abrasives • Hot Toppings • Slag Getter • Mold Releases • Wetting Agents

Crucibles, Ladle Liners & Special Shapes

Crucibles, ladle liners and various special shapes are available from REMET in zirconia, alumina and fused silica. REMET facilitates the selection process for customers by comparing melting techniques, alloys being melted, size and type of furnace and thermal cycling effects. This assures the correct product is paired with the proper set of variables. Capacities ranging from 2 to 2000 lbs. (0.9 to 900 kg) are available, as well as custom shapes and sizes. Compatible Ram and Cap mixes are also available.

Alumina
Crucibles, Ladle Liners and Specialty Shapes

Versatile and economic solution.
Low reactivity with alloys.
Good thermal shock resistance.
Wide range of sizes.
Specialty designs upon request.
Ladle liners available with bottom pour or standard design, and with or without lips.
Alumina contents available from 90%-99%.

Fused Silica
Crucibles and Ladle Liners

Great thermal shock resistance.
Wide range of sizes.
Ladle liners available with bottom pour or standard design, and with or without lips.

Zirconia
Crucibles, Nozzles and Specialty Shapes

High temperature resistance.
High density to minimize metal penetration.
For vacuum melt alloys.
Low reactivity with alloys.
Resistant to erosion.
Isostatically pressed for consistency.
Multiple stabilizing agents available.

Ram and Capping Mixes

Zirconia Backup Grain
Silica Rams
Pak-Tite Spinel
Pak-Tite Plaster

Filters (not available in the U.S.)

Remet supply a comprehensive range of reticulated filters for superalloy, steel, aluminum and non-ferrous casting filtration applications. Aimed at filtration of alloys within the pouring cup or within the casting feeder system depending on the engineers choice the objective being to eliminate ceramic and intermetallic defects where possible.
A full range of materials, pore sizes are available with bespoke geometries and thermal edging materials.

Pouring Cups (not available in the U.S.)

Any bespoke design shape with or without filteration positioning are considered alongside our standard product range of alumino silicate and high alumina pouring cups. Pouring cups are designed to withstand thermal cycling and freestanding and clamped pouring applications

A complete range of ramming and capping materials are available for use with our crucibles. Please ask a representative to help you match the right product with a crucible.