Raw Materials Shell Cracking Shell Systems Wax Reactive Alloy Casting

Ethyl Silicate Binder Non Silica Binder System ADBOND™ Binder System Enhanced Binder System History of Investment Casting

Raw Materials

• Reducing Zircon Sand Usage
• A Study of the Consistency of Zircon Flour
• Alumina and Zirconia Binders
• Characteristics of Some Aluminosilicates – Colloidal Silica Shell Systems
• Dipcoat Nucleation
• Particle Size Determination of Refractories
• REMASIL^® 60: A Refractory for Casting Parts Under High Thermal Stress Conditions
• Review of Shell Components
• Surfactants, Wetting and Foams
• Using Stucco More Effectively
• Water Quality and Colloidal Silica Slurries
• Cobalt Aluminate Levels in Primary Slurries
• The Effect of Particle Size of Fused Silica Flour on Shell Properties

[ TOP ]

---

Shell Cracking

• Avoid Shell Cracking by Controlling Your Process
• Ceramic Shell Production for Controlled Shell Cracking
• The Effect of Dry Time on Shell Strength
• Factors Affecting Shell Strength and The Effect of Dry Time on Shell Strength
• The Influence of Refractory Particle Size of Slurries and Shells
• Comparison of Properties of Zircon/Alumino-Silicate Shells with Water-Based and Ethyl Silicate-Based Binders
• Ceramic Shell and Slurry Characterization

[ TOP ]

---

Reactive Alloy Casting

• Casting of Reactive Alloys: An Update of Current Technology
• Casting of Reactive Metals into Ceramic Molds
• Refractories Used for Investment Casting of High-Temperature Alloys
• Refractory Selection for Primary Shell Coat
• Titanium Investment Casting

[ TOP ]

---

ADBOND^® Binder System

• Effect of Dilution on REMASOL^® ADBOND^® BV Binder
• Enhanced Binder Systems for the Investment Casting Industry
• REMASOL^® ADBOND^® B and REMASOL^® ADBOND^® BV Binders
• REMASOL^® ADBOND^® BV Binder – An Update (by MG)
• REMASOL^® ADBOND^® BV: A Practical Update (by CHM)
• REMASOL^® ADBOND^® BV: A Practical Update (by JRP)
• Comparison of Properties of Zircon/Alumino-Silicate Shells With Water-Based and Ethyl Silicate-Based Binders
• The Effects of Polymer Selection and Level on Shell Properties
• Remasol Adbond SP-3301 and LP-3301 Binders

[ TOP ]

---

Ethyl Silicate Binder

• Ethyl Silicate Shell Systems
• Hot Modulus of Rupture Measurements on Some Aluminosilicate Shell Systems
• REMASOL^® ADBOND^® B and REMASOL^® ADBOND^® BV Binders
• REMASOL^® ADBOND^® BV Binder – An Update (by MG)
• REMASOL^® ADBOND^® BV: A Practical Update (by CHM)
• REMASOL^® ADBOND^® BV: A Practical Update (by JRP)
• Comparison of Properties of Zircon/Alumino-Silicate Shells With Water-Based and Ethyl Silicate-Based Binders

[ TOP ]

---

Non Silica Binder System

• Alumina and Zirconia Binders
• Casting of Reactive Alloys: An Update of Current Technology
• Casting of Reactive Metals into Ceramic Molds

[ TOP ]

---

Process Control

• Avoid Shell Cracking by Controlling Your Process
• The Ceramic Molding Process
• Ceramic Shell Production for Controlled Shell Cracking
• Colloidal Silica in the Precision Casting Industry
• Controlling Core Related Casting Defects
• Effect of Dilution on REMASOL^® ADBOND^® BV Binder
• The Effect of Dry Time on Shell Strength
• Enhanced Binder Systems for the Investment Casting Industry
• Enhanced Binders for the Production of Ceramic Shells
• Factors Affecting Shell Strength and The Effect of Dry Time on Shell Strength
• Factors Effecting Slurry Rheology
• The Influence of Refractory Particle Size of Slurries and Shells
• MOR, Who Needs It?
• Proper Techniques to be Followed in Preparing and Maintaining a Slurry
• Understanding the Shell Room Process
• Using Stucco More Effectively
• Water Quality and Colloidal Silica Slurries
• Slurry Development and Control
• The Effect of Particle Size of Fused Silica Flour on Shell Properties
• Comparison of Properties of Zircon/Alumino-Silicate Shells With Water-Based and Ethyl Silicate-Based Binders
• The Effect of Slurry Viscosity and Stucco Size on Shell Properties

[ TOP ]

---

Shell Systems

• Reducing Zircon Sand Usage
• Alumina and Zirconia Binders
• Casting of Reactive Alloys: An Update of Current Technology
• Casting of Reactive Metals into Ceramic Molds
• Characteristics of Some Aluminosilicates – Colloidal Silica Shell Systems
• Colloidal Silica in the Precision Casting Industry
• Effect of Dilution on REMASOL^® ADBOND^® BV Binder
• Hot Modulus of Rupture Measurements on Some Aluminosilicate Shell Systems
• The Influence of Refractory Particle Size of Slurries and Shells
• Refractories Used for Investment Casting of High-Temperature Alloys
• REMASIL^® 60: A Refractory for Casting Parts Under High Thermal Stress Conditions
• REMASOL^® ADBOND^® B and REMASOL^® ADBOND^® BV Binders
• REMASOL^® ADBOND^® BV Binder – An Update (by MG)
• REMASOL^® ADBOND^® BV: A Practical Update (by CHM)
• REMASOL^® ADBOND^® BV: A Practical Update (by JRP)
• Review of Shell Components
• Titanium Investment Casting
• Using Stucco More Effectively
• Casting of Reactive Alloys: An Update of Current Technology
• Slurry Development and Control
• The Effect of Particle Size of Fused Silica Flour on Shell Properties
• Comparison of Properties of Zircon/Alumino-Silicate Shells With Water-Based and Ethyl Silicate-Based Binders

[ TOP ]

---

Enhanced Binder System

• Effect of Dilution on REMASOL^® ADBOND^® BV Binder
• Enhanced Binder Systems for the Investment Casting Industry
• Enhanced Binders for the Production of Ceramic Shells
• REMASOL^® ADBOND^® B and REMASOL^® ADBOND^® BV Binders
• REMASOL^® ADBOND^® BV Binder – An Update (by MG)
• REMASOL^® ADBOND^® BV: A Practical Update (by CHM)
• REMASOL^® ADBOND^® BV: A Practical Update (by JRP)
• Comparison of Properties of Zircon/Alumino-Silicate Shells With Water-Based and Ethyl Silicate-Based Binders

[ TOP ]

---

WAX

• Investment Casting Analysis Past, Present and Future
• Flow and Deformation of Casting Waxes in the Solidification Region
• The Effect of Fillers on the Physical Properties of Investment Casting Waxes
• Mechanical Properties of Pattern Waxes
• The Reclamation of Investment Casting Waxes
• Health and Safety Aspects of Investment Casting Waxes
• Wax Characterization
• An Overview of the Rheology of Investment Casting Waxes
• Water Soluble Cores for Investment Casting

[ TOP ]

---

History of Investment Casting

Investment Casting 1930-1950

[ TOP ]

---

Instructions to Request REMET Papers

To request a copy of any of the listed papers click the "Request a copy of this paper" link below each article and complete the request form. Within 24 hours we will process your request and be able to either email a copy of the paper or send you a copy in the mail. Since not all the papers are available for email transmission at this time please provide us with your name and address so that we may be able to mail you your request.

[ TOP ]

 

 

 

 

 

 

©2005 REMET CORPORATION, 210 Commons Road, Utica, NY  13502, USA all rights reserved.  Copyrights on this document are owned by REMET CORPORATION.  Any person is hereby authorized to view, copy, print and distribute this document subject to the following conditions:
          1.     The document may be used for informational purposes only.
          2.     The document may only be used for non-commercial purposes.
          3.     Any copy of this document or portions thereof must include this copyright notice.
Note that any product, process or technology described in the document may be the subject of other intellectual property rights reserved by REMET CORPORATION and are not licensed hereunder.