Refractory Sand and Flours

Refractory Materials for Ceramic Slurry

 

Remet supply refractory flours and sands compatible for all alloys cast by the investment casting industry. With grades to make up primary (face coat) and secondary (backup) slurries of the ceramic shell.

There are a number of key considerations, when selecting a refractory for use.

  • Thermal resistance
  • Thermal expansion
  • Thermal conductivity
  • Stability in slurry/reactivity with binder
  • Particle size
  • Mixing time

Remet’s comprehensive range of refractories, enables us to create a solution to ensure both a high quality ceramic shell and final casting is produced.

See our FAQ’s about shell testing here.



  • REMASIL®

    Aluminosilicate Refractory Flour & Sand

     

    REMASIL® is the trade name for REMET® UK’s Aluminosilicate products. Composed of three systems (REMASIL 48, 50 & 60), all calcined to a constant weight and ground to specific grade of both grains and flours. These products produce investment casting shells of excellent refractoriness and high temperature stability, at an incredibly economical rate. The REMASIL® range provides increased strength when compared to Fused Silica systems.

    In the case of stucco grains, the custom grinding of REMASIL results in a more uniform product which has a narrow range of particle sizes and a minimum amount of fines (dust). Reduced fines improve both permeability and intercoat adhesion.  Whilst the powder grains can offer the user a greater level of flexibility, through its offering in two separate cuts, allowing a foundryman to choose the specific grade that best suits their needs.

    Click here to view Particle Size Distribution

    REMASIL 48 Benefits

    • Good refractoriness and high temperature stability.
    • Easy knockout.

    REMASIL50 Benefits

    REMASIL 60 Benefits

    • Higher Alumina content provides for increased refractoriness and stability at high temperatures.
    • Excellent for casting larger parts.
    • Performs exceptionally well when dimensional stability is crucial.

    Interested in this product?

    Add to enquiry
  • REMET® Fused Silica Refractory Flour & Sand

    REMET® UK Fused Silica is made from pure, natural white silica rich sand at 1980oC. At this temperature, the crystalline quartz melts and becomes non-crystalline. The resulting refractory is a pure material that is readily available, which provides a long life slurry practical for both ferrous and non-ferrous metal casting.

    REMET UK Fused Silica has excellent thermal characteristics, as it exhibits a very low level of thermal expansion (5.0 x 10-7 cm/cmoC). Whilst it also provides low thermal conductivity, together these attributes provide a refractory with excellent thermal shock resistance.

    This product provides for excellent slurry stability as well as good pH stability, when used in the primary coating. This will aid in preventing the solution from dropping out, which is crucial in achieving an even coat application, essential in avoiding surface defects.

    The shell produced using REMET UK Fused Silica, is both light weight and highly permeable. Whilst the refractories unique behaviour under extreme heat, creates a shell that once cooled, allows for an easier knockout.

    This material is offered in a wide variety of powder and grain sizes, including our Ez-Cast shell system, for both primary and secondary coat slurry applications.

    Interested in this product?

    Add to enquiry
  • REMET® Zircon

    REMET® UK Fused Silica is made from pure, natural white silica rich sand at 1980oC. At this temperature, the crystalline quartz melts and becomes non-crystalline. The resulting refractory is a pure material that is readily available, which provides a long life slurry practical for both ferrous and non-ferrous metal casting.

    REMET UK Fused Silica has excellent thermal characteristics, as it exhibits a very low level of thermal expansion (5.0 x 10-7cm/cmoC). Whilst it also provides low thermal conductivity, together these attributes provide a refractory with excellent thermal shock resistance.

    This product provides for excellent slurry stability as well as good pH stability, when used in the primary coating. This will aid in preventing the solution from dropping out, which is crucial in achieving an even coat application, essential in avoiding surface defects.

    The shell produced using REMET UK Fused Silica, is both light weight and highly permeable. Whilst the refractories unique behaviour under extreme heat, creates a shell that once cooled, allows for an easier knockout.

    This material is offered in a wide variety of powder and grain sizes, including our Ez-Cast shell system, for both primary and secondary coat slurry applications.

    Milled Zircon

    Mesh FG CG ECG
    200 Tr 0.5 2
    325 1 5 15
    Avg. Micron Size 12 18 23

    Interested in this product?

    Add to enquiry
  • REMET® Alumina

    REMET’S® UK Alumina products are high purity Al2O3compounds, that provide a hard refractory material for use by the investment caster.

    White Fused Alumina

    REMET’S® White Fused Alumina (also known as White Corundum) is a highly purity product fused and sized to meet the needs of the investment caster.

    This product exhibits:

    • High Refractoriness
    • High Resistance to Chemical Attack

    Tabular Alumina

    REMET’S® T1061 Tabular Aluminas are specifically sized, high density, low soda tabular alumina product exhibiting low porosity, resistance to chemical attack, resistance to thermal shock , high mechanical strength , extreme hardness and resistance to wear.

    This product is ideal for high temperature shell systems.

    Interested in this product?

    Add to enquiry
  • Zirconium Oxide

    REMET® UK Stabilized Zirconia are electrically fused combinations of Zirconium Oxide and approximately 4% Calcium Oxide. This yields products with about 70% Cubic Zirconia plus 30% Monoclinic Zirconia.

    The major investment casting application for this family of products is as the primary coat flour and stucco in the casting of reactive alloys including Titanium alloys.

    Interested in this product?

    Add to enquiry