Considerations when making up a slurry
Gavin Dooley PhD - Group Technical Director
Introduction This article outlines the considerations and factors effecting slurry make up and management. There are many factors to consider...
Stucco Application Methods – The Practice
Gavin Dooley PhD - Group Technical Director
In the article below, we will take what we learned in the first article to assess how the different stucco...
Stucco Application Methods – The Theory
Gavin Dooley PhD - Group Technical Director
In the article below, I would like to discuss what the differences are within the two stuccoing methods within investment...
Factors Affecting Slurry Rheology
Manuel Guerra - Laboratory Manager & Gavin Dooley PhD - Group Technical Director
Purpose of Slurry Rheology Control Today, Foundrymen are interested in controlling casting quality. This includes the control of surface finish,...
Effects of Freezing Conditions on Colloidal Silica
What happens when the binder is kept in an environment of temperature < 0℃? When a colloidal silica binder is...
How much does my shell cost?
Dr. Gavin Dooley PhD - Group Technical Director
In this short article I will show you how to calculate the true cost of a shell during production. By...
An analysis into Surface Tension – The missing link to a good prime coat?
Dr. Gavin Dooley PhD - Group Technical Director
I hope the title caught your attention! Below is a summary of the findings presented for the EICF European Casting...
Wax on Wax off – Part 1 – De-waxing the shell
Kevin Lee (Remet), Gavin Dooley (Remet), Howard Pickard (LBBC)
The de-waxing process is one of the most important steps in the Investment casting process. Kevin Lee has completed immense...
AdBond® QuikSet™ – A technical comment
Dr. Gavin Dooley PhD - Group Technical Director
Introduction Due to the success of my earlier article discussing the benefits of the FastForm™ wax product line, I thought...
Factors affecting shell strength and slurry life – a dive into the chemistry and microstructural effect
Kevin Lee PhD - R&D and Technical Process Engineer
Welcome to my first insight article on ceramic shell moulds. I am aware that there are already thousands of papers...
Use of Statistics in Consumable manufacture and control – Part two – Is it in control?
Dr. Gavin Dooley PhD - Group Technical Director
I hope I have not lost everybody since my first article! In my first article, (Use of Statistics in Consumable...
Use of Statistics in Consumable manufacture and control – Part one – Am I testing this right?
Dr. Gavin Dooley PhD - Group Technical Director
Introduction I hope I have not lost everybody by the heading of this article! In the following article series, I...
Slurry Testing; Common Pitfalls and Mistakes
Alex Spence - Senior Quality Controller
Welcome to my first insight article. I am Alex Spence, my undergraduate degree was in combined sciences, and I am currently...
Refractory Insight – Part 2: Testing
Alex Spence - Senior Quality Controller
Welcome to my second insight article for Remet UK. If you didn’t catch my first insight, on “Slurry Testing, Common pitfalls...
Refractory Insight – Part 1: An Introduction
Dr. Gavin Dooley PhD - Group Technical Director
Introduction Following a recent visit to an art foundry, I was prompted to write this article in relation to what...
FF>>Form® – A technical comment
Gavin Dooley - Group Technical Director
Cross Linked PolyStyrene – On the up and up! For any producers of investment cast parts, they are probably using...
Investment Casting Permeability
Gavin Dooley - Director of Technical Operations
Introduction My first three articles (Strength Part 1 | Part 2 | Part 3) dealt with the strength of materials,...
An Overview of Creep in Ceramics and Simple Strategies to Reduce its Significance in Equiaxed Investment Casting Moulds.
Bob Brown - Director of Sales and Marketing
A summary of creep models and prospective solutions to reduce its impact on the manufacture of equiaxed turbine blades in...
Integrated Management Systems: Badge or Bonus?
Bob Brown - Director of Sales and Marketing
REMET® UK runs a well-constructed Integrated Management System (IMS), into which it incorporates its certification under ISO9001, ISO 14001, OHSAS18001, and...
Investment Casting Hygiene: Its a Bugs Life!: Part 2
Bob Brown - Director of Sales and Marketing
Termination Day This post is the much awaited follow up to my post a few months ago with respect to the...
Investment Casting Hygiene: Its a Bugs Life! Part 1
Bob Brown - Director of Sales and Marketing
Enhanced colloidal silica binders, such as REMASOL, are composed of sub microscopic particles of silica suspended in latex and water...
pH Control in Investment Casting Slurries
Bob Brown - Director of Sales and Marketing
Thanks for the continued interest in these short posts: In this post we’ll talk about the measurement and control of...
Antifoam selection and use
Bob Brown - Director of Sales and Marketing
Previously I wrote about the use of surfactants and wetting agents in Colloidal silica slurries. Again many thanks for the...
Surfactants in Colloidal Silica Slurries
Bob Brown - Director of Sales and Marketing
I may have started a ball rolling! First of all thanks for the positive (and negative) comments on the previous...
Investment Casting Strength – Part 3: Shell materials
Gavin Dooley - Director of Technical Operations
If you are still reading this series, then you have come through a journey of discovery of strength and how...
Investment Casting Strength – Part 2: The parameters
Gavin Dooley - Director of Technical Operations
In section one we discussed what happens when a sample is subjected to loading under flexural testing and the associated...
Investment Casting Strength – Part 1: The basics
Gavin Dooley - Director of Technical Operations
Hello everyone, as part of my new and exciting role within Remet®, I thought I would take some time to...
Using fine fused silica flours in primary slurries
Bob Brown - Director of Sales and Marketing
Prompted by material shortages and unmanageable price increases a few years ago, there has been a move away from fully...