Specialty Wax



  • SOLUCORE®

    Water Soluble Wax

    SOLUCORE® waxes are able to produce cavities of a far greater complexity than can be achieved through tool design alone.

    Remet’s soluble waxes have been designed to allow users to achieve a high level of detail, negating the need to invest in preformed ceramic cores.

    Blends of soluble wax can be highly sophisticated compounds, which are able to be tailored to the needs of the investment caster. Through Remet’s expert knowledge, users can control and monitor a soluble wax’s properties leading to improvements in the injection, handling and leaching times. The SOLUCORE range of water soluble waxes are made up of both fibrous and non-fibrous materials, which are suitable for making patterns requiring both small and delicate cores, as well as, large and chunky cores.

    SOLUCORE waxes have the following key benefits:

    • Low shrink rate
    • Fast dissolution speed
    • Excellent dimensional stability
    • High quality surface finish
    • Very limited sink or dishing
    • Resistant to crazing and cracking

    To find out more information about our SOLUCORE water soluble waxes, please contact us. One of Remet’s Technical Sales Managers would be happy to discuss your requirements and what we can supply for your process.

    Interested in this product?

    Add to enquiry
  • STICKTITE®

    Sticky Casting Wax

     

    STICKTITE® waxes have been designed specifically as a sticky wax for use in the assembly of sprue/pattern trees prior to the shell forming process. These materials have low odour and smoke and impart exceptionally high adhesive and cohesive strength to the sprue/pattern joint. The differing formulations offer the choice off set up and solidification times.

    Remet’s STICKTITE waxes can be used as an adhesive between wax and wax, or sticking ceramic to wax (for instance pouring cups and rings). We are able to specify criteria such as opening times to ensure that the investment caster has the time they require for positioning and correcting parts during assembly.

    To find out more information about our STICKTITE, sticky waxes, please contact us. One of Remet’s Technical Sales Managers would be happy to discuss your requirements and what we can supply for your process.

    Interested in this product?

    Add to enquiry
  • RED C® Extrusions

    Extruded Wax

    Remet RED C® Wax Extrusions are designed to be soft, pliable and strong shapes which allow the investment caster to design a flexible assembly system that is not restricted to conventional method. These wax extrusions can be shaped without fear of cracking or breaking.

    RED C® Extrusions are offered in a range of shapes:

    • Square
    • Rectangle
    • Circle
    • Triangle
    • Wedge
    • Half Round
    • Polygon
    • Segment

    With sizes available from 1/8? to 1-1/4?

    To find out more information about our RED C® extruded waxes, please contact us. One of Remet’s Technical Sales Managers would be happy to discuss your requirements and what we can supply for your process.

    Interested in this product?

    Add to enquiry
  • Dipseal®

    Over Dipping Wax

    DIPSEAL® waxes are low viscosity blends designed to be used as an over dipping wax for coating runner/pattern assemblies. They can be used for blending out imperfections and as a low melt point surface wax.

    Other similar products used specifically for the Artisan industry are:

    • Premiere Sealing Wax
    • Beeswax

     

    Key product features:

    • Low Drop Melt Point allows the flow to start quickly and permits safe expansion of the pattern wax.
    • Low viscosity allows rapid evacuation during dewaxing.
    • Low ash minimizes metal mold reaction.
    • Good primary slurry coat adhesion.

     

    To find out more information about our DIPSEAL over dipping waxes, please contact us. One of Remet’s Technical Sales Managers would be happy to discuss your requirements and what we can supply for your process.

    Interested in this product?

    Add to enquiry
  • Patching and Utility Wax

    Investment Casting Patching & Utility Wax

    Remet supplies a versatile range of soft, pliable waxes that can aid the investment caster in repairing defects in wax patterns, assemblies and soluble cores.

    SOLUCORE® patching wax has been developed as a water soluble repair wax to repair and remove imperfections of soluble cores in wax patterns.

    Remet’s non-soluble patching waxes, can be warmed in the hand to soften for patching applications or can be melted and applied in the liquid state.

    We also supply utility casting waxes, which are versatile blends to be used also for repairs, as well as, the assembly of pattern segments and other tasks required by the investment caster. Remet Utility waxes are supplied in both slab and sheet forms. Sheets are available in 1/8”, 1/4″, and 3/8” thicknesses.

    To find out more information about our utility and patching waxes, please contact us. One of Remet’s Technical Sales Managers would be happy to discuss your requirements and what we can supply for your process.

    Interested in this product?

    Add to enquiry