Artisan



  • REMET Paraffin Waxes

    REMET Paraffin Waxes:

    Melting Point:

    54-56 C – FR 54/56

    56-58 C – FR 56/58

    58-60 C – FR 58/60

    64-66 C – FR 64/66

    Interested in this product?

    Add to enquiry
  • BF3000™

    BF3000 is a stable non-decomposing biocide that is effective in alkaline binders used in the investment casting process.

    BF3000 is an all purpose biocide. Designed to kill a wide range of bacterial infections in investment casting slurries.

     

    Interested in this product?

    Add to enquiry
  • REMASIL®

    Aluminosilicate Refractory Flour & Sand

     

    REMASIL® is the trade name for REMET® UK’s Aluminosilicate products. Composed of three systems (REMASIL 48, 50 & 60), all calcined to a constant weight and ground to specific grade of both grains and flours. These products produce investment casting shells of excellent refractoriness and high temperature stability, at an incredibly economical rate. The REMASIL® range provides increased strength when compared to Fused Silica systems.

    In the case of stucco grains, the custom grinding of REMASIL results in a more uniform product which has a narrow range of particle sizes and a minimum amount of fines (dust). Reduced fines improve both permeability and intercoat adhesion.  Whilst the powder grains can offer the user a greater level of flexibility, through its offering in two separate cuts, allowing a foundryman to choose the specific grade that best suits their needs.

    REMASIL 48 Benefits

    • Good refractoriness and high temperature stability.
    • Easy knockout.

     

    REMASIL50 Benefits

    • Increased hot strength.
    • Robust and resilient.
    • Easy knockout.

     

    REMASIL 60 Benefits

    • Higher Alumina content provides for increased refractoriness and stability at high temperatures.
    • Excellent for casting larger parts.
    • Performs exceptionally well when dimensional stability is crucial.

    Interested in this product?

    Add to enquiry
  • HYFILL®

    HYFILL® – Filled Investment Casting Pattern Wax

    HYFILL® waxes are incredibly versatile blends of casting wax, containing 30% or greater of an inert polymeric filler content. Utilising REMET UK’s in-depth knowledge, these waxes can be tailored to a customer’s individual purpose, across a wide range of applications. Designed specifically for technically demanding components these casting waxes are characterised by their:

    • Excellent dimensional pattern reproducibility
    • Producing parts with greater stability
    • Reduced contraction rates
    • High quality surface finish
    • Low melt viscosity, giving good flow properties

    HYFILL® blends have been used to make patterns for the following castings:

    • Medium and large thin walled patterns typical of aluminium and titanium castings
    • Small through to large sized patterns for IGT, Aerospace and Commercial Markets

    REMET are able to customise blends to meet a broad range of mechanical and injection requirements. HYFILL® waxes can be formulated to enable their use on either a liquid, paste or extrusion injection machinery.

    To find out more information about our HYFILL casting waxes, please contact us. One of REMET’s Technical Sales Managers would be happy to discuss your requirements and what we can supply for your process.

    Interested in this product?

    Add to enquiry
  • LITEFILL®

    LITEFILL – Investment Casting Pattern Wax for the Automated Production Line

    The LITEFILL® casting wax range is designed for use in the production of small to medium sized patterns and uses less than 30% polymeric filler content. The materials have good tensile properties, making them suitable for use on high speed automated extrusion injection machinery, in addition to traditional liquid and paste injection machines.

    LITEFILL waxes have been used successfully in the automotive industry, for the production of turbo wheels, on automatic machines. These casting waxes can be characterised by their:

    • Fast setting nature
    • High productivity
    • High dimensional stability
    • Good flow
    • Good surface finish

    All materials are designed with reclamation in mind to give our customers a cost effective way of utilising system waxes. All of our reclaim waxes are reconstituted to near virgin standard.

    To find out more information about our LITEFILL casting waxes, please contact us. One of REMET’s Technical Sales Managers would be happy to discuss your requirements and what we can supply for your process.

    Interested in this product?

    Add to enquiry
  • CASTYLENE®

    Unfilled Investment Casting Pattern & Runner Wax

    Remet’s CASTYLENE® range are blends of pattern and runner/sprue waxes that are unfilled. These waxes have both low melting and congealing points making them suitable for liquid, paste injection and extrusion methods.

    The low viscosity of CASTYLENE waxes aids the blends in filling even the most complex dies, producing sharply defined patterns. This characteristic makes this range of waxes ideal for application in the casting of decorative pieces, where detail is critical.

    CASTYLENE waxes are tough and flexible to resist breakage and chipping during handling and efficient dewaxing. Its good mechanical properties allow CASTYLENE waxes to perform excellently as a runner/sprue wax, avoiding damage of the wax patterns.

    To find out more information about our CASTYLENE casting waxes, please contact us. One of Remet’s Technical Sales Managers would be happy to discuss your requirements and what we can supply for your process.

    Interested in this product?

    Add to enquiry
  • FF>>Form®

    Improve Productivity with Shorter Dwell Times

    FastForm® is an ultra low-filled wax that acts as a filled wax. It can be injected as a liquid, but excels as paste wax due to its short cycle times. Produces patterns with the hardness and toughness required for the production of precision investment parts with superb surface finish. Features and benefits of this unique wax are as follows:

    • Shorter dwell times increase productivity
    • Ultra-low filled pattern wax
      • Less shell cracking
      • Increases reclaim yield
    • Excellent dimensional stability
    • Fine surface finish
    • Less cavitation, sink and shrink
      • Low injection temperature

    Interested in this product?

    Add to enquiry
  • SOLUCORE®

    Water Soluble Wax

    SOLUCORE® waxes are able to produce cavities of a far greater complexity than can be achieved through tool design alone.

    Remet’s soluble waxes have been designed to allow users to achieve a high level of detail, negating the need to invest in preformed ceramic cores.

    Blends of soluble wax can be highly sophisticated compounds, which are able to be tailored to the needs of the investment caster. Through Remet’s expert knowledge, users can control and monitor a soluble wax’s properties leading to improvements in the injection, handling and leaching times. The SOLUCORE range of water soluble waxes are made up of both fibrous and non-fibrous materials, which are suitable for making patterns requiring both small and delicate cores, as well as, large and chunky cores.

    SOLUCORE waxes have the following key benefits:

    • Low shrink rate
    • Fast dissolution speed
    • Excellent dimensional stability
    • High quality surface finish
    • Very limited sink or dishing
    • Resistant to crazing and cracking

    To find out more information about our SOLUCORE water soluble waxes, please contact us. One of Remet’s Technical Sales Managers would be happy to discuss your requirements and what we can supply for your process.

    Interested in this product?

    Add to enquiry
  • STICKTITE®

    Sticky Casting Wax

     

    STICKTITE® waxes have been designed specifically as a sticky wax for use in the assembly of sprue/pattern trees prior to the shell forming process. These materials have low odour and smoke and impart exceptionally high adhesive and cohesive strength to the sprue/pattern joint. The differing formulations offer the choice off set up and solidification times.

    Remet’s STICKTITE waxes can be used as an adhesive between wax and wax, or sticking ceramic to wax (for instance pouring cups and rings). We are able to specify criteria such as opening times to ensure that the investment caster has the time they require for positioning and correcting parts during assembly.

    To find out more information about our STICKTITE, sticky waxes, please contact us. One of Remet’s Technical Sales Managers would be happy to discuss your requirements and what we can supply for your process.

    Interested in this product?

    Add to enquiry
  • RED C® Extrusions

    Extruded Wax

    Remet RED C® Wax Extrusions are designed to be soft, pliable and strong shapes which allow the investment caster to design a flexible assembly system that is not restricted to conventional method. These wax extrusions can be shaped without fear of cracking or breaking.

    RED C® Extrusions are offered in a range of shapes:

    • Square
    • Rectangle
    • Circle
    • Triangle
    • Wedge
    • Half Round
    • Polygon
    • Segment

    With sizes available from 1/8? to 1-1/4?

    To find out more information about our RED C® extruded waxes, please contact us. One of Remet’s Technical Sales Managers would be happy to discuss your requirements and what we can supply for your process.

    Interested in this product?

    Add to enquiry
  • Dipseal®

    Over Dipping Wax

    DIPSEAL® waxes are low viscosity blends designed to be used as an over dipping wax for coating runner/pattern assemblies. They can be used for blending out imperfections and as a low melt point surface wax.

    Other similar products used specifically for the Artisan industry are:

    • Premiere Sealing Wax
    • Beeswax

     

    Key product features:

    • Low Drop Melt Point allows the flow to start quickly and permits safe expansion of the pattern wax.
    • Low viscosity allows rapid evacuation during dewaxing.
    • Low ash minimizes metal mold reaction.
    • Good primary slurry coat adhesion.

     

    To find out more information about our DIPSEAL over dipping waxes, please contact us. One of Remet’s Technical Sales Managers would be happy to discuss your requirements and what we can supply for your process.

    Interested in this product?

    Add to enquiry
  • Pattern Wash

    Product Information

    Good pattern wash practices are essential for pattern making in the investment casting foundry. Promoting adherence of the slurry onto the wax surface, removing any residual mold release agents preventing lifting or buckling of the prime coat and subsequent bulging on the surface of castings.

    REMET® Pattern Washes are:

    • Economical to use
    • Low evaporation rates
    • Non-flammable, but combustible
    • 100% water soluble
    • Have no special storage or handling requirement, except adequate ventilation

    All products have been tested and approved for use with REMET waxes.

    CitriWash

    CitriWash is a specially formulated pattern wash for cleaning wax pattern trees.

    Key features:

    • Suitable for all types of wax
    • Environmentally safe
    • Long lasting and can be recycled to help the environment
    • 100% water soluble
    • Fruity fragrance based on natural ingredients

    Pattern Wash II

    Pattern Wash II is a solvent based product which has proved effective in removing silicone from wax patterns. It’s advantages are:

    • Can be rinsed from the wax patterns using water or a soap and water solution
    • Does not contain flammable, toxic or polluting chemicals

    Pattern Wash II is compatible with all types of metals, with high density polyethylene and with all types of plastics except polystyrene and polycarbonate.

     

    Pattern Wash 6

    Pattern Wash 6 is a blend of high purity hydrocarbons, emulsifiers and surfactants, specially formulated for wax pattern cleaning. Pattern Wash 6 should be used at full strength and should not be diluted under any circumstances. It’s advantages are:

    • Can be rinsed from wax patterns using running water, no detergent is necessary
    • Preparation is not subject to recognised exposure limits

    Interested in this product?

    Add to enquiry